Purity Statement
Series II
Dual Mono, Twin Chassis
Class A, Balanced, Transformer Coupled Linestage

The Statement dual mono balanced linestage is a  result of years of intensive research directed at attaining the most accurate reproduction of recorded music.  Unique topology and application of the most advanced technological resources and processes bring the Purity Statement to a threshold of excellence in sound reproduction. 

The Purity Statement Series 2 utilizes all the advanced features one would come to expect from a world class product.. The Series 2 brings to the table a new enhanced circuit allowing the use of either 6SN7 or 12AU7 tube types depending on the sound you are looking for. Silver Bybee Purifiers units in the Silver Statement in the input signal path and full silver/Teflon wiring throughout. Bybee Purifiers are also found in each of the two power supplies prior to the rectification circuit for the ultimate in residual noise filtering. Teflon tube sockets and a silver plated wired power supply, including filament circuitry, and umbilical connection cord are also found in the Series 2 enhancements.

 The Statement has a unique employment of output gain selection. rather than installed sonic purity robbing resistors in the signal path, Purity Audio Design has come up with a unique way of obtaining six output gain levels using specially design autoformers as not to impart of the sonic integrity of the circuit or degrading impedance interactions.

A distinctive feature of the Purity Statement setting it apart from it's competition are its full dual mono power supplies found in a separate chamber located in an outboard chassis also meant to act as a base for the analog chassis. Our power supplies are choke filtered and use high current Toroidal transformers and 100% polypropylene filter capacitor banks. Utilizing the power supply externally not only keeps the weight and size of the Statement manageable (each power supply weighs >35lbs), it keeps the transformers and their electric fields away from the sensitive audio circuitry. It also allows room for the elaborate and sophisticated power supply not found in other tube preamplifiers.

To add to it's main features, the Purity Statement utilizes transformer coupling at both the input and output with full silver transformers used in the Silver Statement. Transformer coupling output results in a low output impedance making for better integration with any type of amplifier. Highest quality acrylic encapsulated "Purity Caps" made by Clarity Cap. Attenuation is handled by a balanced autoformer design with  Bybee purifiers at the input on the Silver models. Extraordinary transparency of perceived sound which in turn assures the recreation of a three dimensional soundstage.

Extensive research, testing and listening led us to a unique, innovative design that achieves very low distortion and wide bandwidth without the need for negative feedback which destroys transient purity.

The full function remote handles volume, mute, balance, source select and phase as well as being able to completely turn off the display. A very precise autoformer attenuation provide 1dB increments. All remote features can be used both in active and passive mode.

Another unique feature of the Statement is fully transformer coupled, balanced passive mode. The Statement's passive mode provides greater detail, resolution and transparency than any other passive device on the market and it still routes the signal through the input and output transformers, and of course the wonderful sounding Autoformers. Copper transformers are used in the Statement with all silver units used in the Silver Statement.

To help greatly reduce airborne vibrations from having a negative effect on the vacuum tubes and ruining your listening experience, both chassis of the Statement are equipped with Herbie's Audio Labs Tenderfeet.

All Purity Products can be configured to run with the following mains voltages: 110V- 117V or 220V-240V. Primary voltages are factory wired so let your dealer know what voltage arrangement you need at time of ordering.

As with all Purity Series products, the remote circuit has been granted a dedicated power supply including a separate, standalone power transformer as not to interfere at all with the analog circuit.

The Series II brings to the table not only a newly design aluminum chassis but also several enhancements to the circuit including new custom made balanced input transformers, highly regulated DC filament supplies (one per channel), new grounding scheme and a new layout design among other enhancements.

  • Type : Dual mono, dual chassis Class "A", zero feedback, vacuum tube preamplifier
  • Inputs : Unbalanced ×3,  Balanced ×3 (unbalanced inputs transformer coupled)
  • All inputs go through a balanced transformer (unbalanced outputs transformer coupled)
  • Outputs : Unbalanced x2/ Balanced x2-- ("pin 2 hot" studio standard, pin 1 grounded with lift option)
  • Function : Input selector, Volume, Phase Inversion, Balance, Mute & Display on/off
    All functions controllable via both remote and front panel
  • Passive mode - fully transformer coupled with all functions
  • Input impedance: 100K ohms
  • Output impedance: <180 ohms
  • Frequency response: 13Hz-35kHz -1dB
  • Output gain: via autoformer based gain selector
    6 position in 3dB increments
  • Total harmonic distortion: 0.05% @ 1V output
  • AC Power Requirements : 117/220/230/240 volts (factory wired)
  • Fuse 1 amp fast blow x2
  • Tube lineup : 2x 6SN7 or 5814/ECC82(12AU7)×2
  • Dimensions :
       Overall: 17" Wide x 15" Deep x 12" High
       Main Chassis: 17" W x 15" D x 7.5" H
       Power Supply: 17" W x 15" D x 4.5" H
  • Net Weight :
  • Shipping weight:


Main Features
  • 0 dB negative feedback
  • Pure tube design (no transistors)
  • shortest possible signal paths
  • Very low output impedance to drive any tube or solid state power amp
  • Audiophile grade passive components used in all applications
  • Teflon tube sockets
  • Central one-point earth grounding
  • Fully hand assembled to insure the highest level of craftsmanship 
  • AVC – “autoformer volume control”, 2 channels / 61 steps @ 1dB ea.
  • Autoformer based, 6 position output gain selector
  • Relay based source selector
  • No common ground between any inputs.
  • 100% point to point wired - NO PCB
  • Special ROHS silver solder used for the best electrical connection
  • Selector switch engages relays located near RCA jacks to switch all inputs
  • 2x 6SN7 or 12AU7 tubes for stereo line-amplification ( tube life > 10000 hrs )
  • Supplied with Sophia 6SN7 tubes
  • Highly regulated DC filament supply for signal tubes (separate power supply per tube)
  • Balanced Silver output transformers (Custom made for Purity Audio Design) - Silver Statement
  • Balanced Silver input transformers (Custom made for Purity Audio Design) - Silver Statement
  • Balanced Copper output transformers (Custom made for Purity Audio Design) - Statement
  • Balanced Copper input transformers - Statement
  • Highest quality Clarity Cap MR Series output coupling capacitors
  • V-Cap TFTF inner stage coupling capacitors
  • Premium internal signal cable uses ultra pure Silver/Teflon
  • Silver Bybee Purifiers installed in signal path - Silver Statement
  • Twin chamber analog chassis design separated by copper lined aluminum effectively fights against RFI and EMI.
  • RCA high quality Teflon silver input/output jacks
  • 3 pair XLR balanced inputs
  • 3 pair RCA single ended inputs (transformer coupled)
  • 2 sets XLR balanced outputs
  • 2 sets RCA single ended outputs (transformer coupled)
  • All 4 sets of outputs active at all times allowing for multiple configurations for bi-amping or use of an active subwoofer(s)
  • Neutrik/Swiss - XLR chassis connectors
  • Remote Control for Volume, Balance, Mute, Phase Reverse & display off
  • Herbie's Audio Labs Tenderfeet
  • All front & rear panel descriptions are laser engraved
  • Chassis finish: Black
  • Solid aluminum, laser engraved remote handset
  • Made in USA
  • Three years parts and labor warranty. 90 days on supplied tubes

Power Supply

  • Two large high current toroidal transformers (one per channel), RFI/EMI ultra-shielded
  • Separate power transformer and DC power supply for remote control system
  • Choke filtered power supplies
  • Polypropylene power supply filter capacitor banks
  • StealthTM (Ultra Fast) diodes used throughout.

Please see our Product Comparison Chart to help you in making the proper decision for your system goals.

What our customers are saying

Upgrade Path:
Purity Audio Design has an upgrade path available. We have available the ability to take the Statement to a Silver Statement as well as either of the Statement models to one of the Ultra models.